Gas Fireplace Installation — Hammersmith and Fulham
Gas fireplace installation in Hammersmith and Fulham
Gas Safe registered engineers installing gas fires and gas fireplaces across Hammersmith and Fulham — Hammersmith, Fulham, Shepherds Bush, Parsons Green. From £800. All fire types including inset fires, freestanding stoves, flueless gas fires, and hole-in-the-wall. CO detector included.
What you need to know
Gas fire installation in Hammersmith and Fulham: what you need to know
Gas Safe requirement
Any gas appliance installation in the UK must be carried out by a Gas Safe registered engineer. This includes all gas fire types. You can verify any engineer at GasSafeRegister.co.uk.
Flue types
Class 1 chimney (traditional open flue), pre-fabricated flue (for newer properties), or balanced flue (for properties with no chimney — routes fresh air in and combustion gases out via a coaxial pipe through the external wall or roof).
Flueless gas fires
CE-marked flueless fires catalytically combust gas with near-zero flue gas output. They require a minimum room volume (typically 30m3), a permanent ventilation opening, and cannot be installed in bedrooms or bathrooms.
Building Regs notification
Gas fire installation is notifiable under Building Regulations Part J. A Gas Safe registered engineer on an approved competent person scheme self-certifies the work.
CO detector requirement
A carbon monoxide detector is mandatory in any room where a new gas fire is installed (Building Regulations Part J, 2022 amendment). We supply and fit an audible alarm with every installation.
Pricing
Inset gas fire from £800. Freestanding stove from £1,200. Flueless fire from £900. Hole-in-the-wall from £1,500. Flue lining from £600. Total installed cost depends on flue work required.
What we install
Gas fire types and pricing
Inset gas fire
Traditional or contemporary inset gas fire fitted into an existing fireplace opening. Requires class 1 chimney or pre-fabricated flue. Supply and fit from £800.
Freestanding gas stove
Log-effect freestanding gas stove connected to gas supply and flue liner or balanced flue. Supply and fit from £1,200.
Flueless gas fire
CE marked flueless gas fire — no chimney or flue required. Subject to minimum room size requirements and ventilation regulations. From £900 supply and fit.
Hole-in-the-wall fire
Contemporary glass-fronted hole-in-the-wall gas fire with pre-fabricated balanced flue through the external wall. From £1,500 supply and fit.
Flue lining
Class 1 chimney flue lining using flexible stainless steel liner — required for most solid fuel-to-gas conversions. Supply and fit from £600.
Balanced flue installation
Balanced flue system for properties without a chimney — concentric pipe routed through the external wall or roof. From £400 for the flue system.
Gas Safe registered
Book gas fire installation in Hammersmith and Fulham
All installations include Building Regs notification and a mandatory CO detector. We cover all of Hammersmith and Fulham.
Book gas fireplace installation180+ verified reviews
Trusted by London homeowners
60 reviews
Checkatrade.com
120 reviews
MyBuilder.com
Common questions
Gas fireplace installation Hammersmith and Fulham: frequently asked
Do I need a chimney for a gas fire?
No — modern gas fires can use a balanced flue system that routes through the external wall, so no chimney is required. Flueless gas fires require no flue at all but are subject to room size and ventilation requirements. We will survey your property and advise on the most suitable fire type.
Is a Gas Safe engineer required for gas fire installation?
Yes — by law, all gas appliance installations must be carried out by a Gas Safe registered engineer. Verify any engineer at GasSafeRegister.co.uk. We carry Gas Safe registration and self-certify all installations under Building Regulations Part J.
Can a flueless gas fire be installed in a bedroom?
No. Flueless gas fires cannot be installed in bedrooms or bathrooms under current Building Regulations. They also require a minimum room volume (typically 30m3), a permanent ventilation opening, and must be CE-marked for use in the UK.
How long does gas fire installation take?
A straightforward inset gas fire installation into an existing fireplace opening with a serviceable flue takes 4 to 6 hours. A hole-in-the-wall fire with a new balanced flue takes 6 to 8 hours. Flue lining work adds a day. We provide a realistic time estimate at survey stage.