Gas Cooker Installation — Haringey
Gas cooker installation in Haringey
Gas Safe registered engineers connecting and installing gas cookers and gas hobs across Haringey — Tottenham, Wood Green, Hornsey, Crouch End. Freestanding cooker swaps from £80. Built-in hob hard pipe connections from £200. New gas supply points from £400. CP12 appliance checks for landlords.
Areas in Haringey we cover
What you need to know
Gas cooker installation in Haringey: what you need to know
Gas Safe requirement
Connecting any gas appliance to the mains supply is illegal for anyone who is not Gas Safe registered — it is a criminal offence under the Gas Safety (Installation and Use) Regulations 1998, not merely dangerous. This applies to freestanding cookers, built-in hobs, and range cookers. You can verify any engineer at GasSafeRegister.co.uk.
Freestanding gas cookers
A freestanding gas cooker connects to the gas supply via a wall-mounted bayonet point and a CE-marked flexible hose. The bayonet connector is a quick-release fitting — the flexible hose must be no longer than 2 metres and should be replaced at least every 5 years. Both the bayonet point and the flexible connector require an annual inspection.
Built-in gas hobs
A built-in gas hob requires a permanent hard pipe connection — a flexible hose and bayonet connector cannot be used. The engineer routes rigid copper pipework from the gas supply through or under kitchen units, which may require worktop cutouts or floor access. This work is more involved than a freestanding swap and takes 2 to 3 hours.
Flue and ventilation
Open-flued appliances require adequate room ventilation under Building Regulations Part J. Kitchen extraction fans can depressurise the room and affect combustion appliance performance. We check that extraction systems do not create a negative pressure environment and confirm ventilation requirements are met before commissioning.
What the job includes
We isolate the existing appliance safely, check the integrity of existing supply pipework, connect the new appliance, perform a full gas tightness test, functionally test all burners, and issue commissioning paperwork. No job is complete until a gas tightness test confirms zero pressure drop on the installation.
Landlord obligations
Gas cookers and hobs in rental properties must be included in the annual Gas Safety Check (CP12). A CP12 that does not cover all gas appliances — including the cooker — is not compliant and exposes landlords to criminal liability. We issue a fully compliant CP12 certificate covering every gas appliance on the property.
Services
Gas cooker and hob installation services
Freestanding Cooker Swap
Swapping a freestanding gas cooker using an existing wall-mounted bayonet point. New flexible hose supplied. Full gas tightness test and burner function test on completion. From £80-£150.
Built-in Hob Installation
Permanent hard pipe connection for built-in gas hobs. Rigid copper pipework routed through or under kitchen units. Gas tightness test on completion. From £200-£400.
Range Cooker Connection
Hard pipe connection for range cookers including gas flow rate check and supply pressure verification. Gas tightness test and full burner function test. From £200-£400.
New Gas Point Installation
New gas supply point from existing pipework to a new location — kitchen island, extension, or utility room. Copper pipework, isolation valve, and commissioning paperwork. From £400-£700.
Bayonet Connector Fitting
Wall-mounted bayonet connector installation for freestanding cooker connections. Includes pressure test and new flexible hose if required. From £80-£150.
CP12 Appliance Check
Annual gas safety inspection covering the cooker or hob as part of a full CP12 Gas Safety Certificate. Required for all rental properties. Covers all gas appliances on the property. From £80.
What we install in Haringey
Gas cooker installation checklist
180+ verified reviews
Trusted by London homeowners
60 reviews
Checkatrade.com
120 reviews
MyBuilder.com
Gas Safe registered
Gas Safe cooker and hob installation across Haringey — book a Gas Safe registered engineer
All installations include a full gas tightness test and commissioning paperwork. We cover all of Haringey.
Book gas cooker installationCommon questions
Gas cooker installation Haringey: frequently asked
Can I connect a gas cooker myself in Haringey?
No — it is illegal for anyone who is not Gas Safe registered to connect a gas appliance to the mains gas supply in the UK. This applies in Haringey and across the whole of Great Britain. Only a Gas Safe registered engineer can legally connect, reconnect, or commission a gas cooker or gas hob. Prestige Engineers are Gas Safe registered and cover all of Haringey.
Do I need a Gas Safe engineer to install a built-in hob in Haringey?
Yes — a built-in gas hob requires a permanent hard pipe connection to the gas supply. This work must be carried out by a Gas Safe registered engineer. A built-in hob cannot be connected using a flexible hose and bayonet connector — it requires a fixed pipework connection routed through the kitchen units.
Does my gas cooker get checked on the annual CP12 in Haringey?
Yes — all gas appliances in a rental property must be included in the annual Gas Safety Check (CP12). This includes the gas cooker or hob, the boiler, and any gas fires. A CP12 that does not cover all gas appliances in the property is not compliant.
How long does gas cooker installation take in Haringey?
A straightforward freestanding gas cooker swap using an existing bayonet point typically takes 45 to 90 minutes in Haringey. A built-in gas hob with a new hard pipe connection takes 2 to 3 hours. A new gas supply point installation may take half a day or longer depending on the routing required.