Fuse Board Upgrade — SW19
Fuse Board Upgrade SW19
NICEIC registered electricians replacing fuse boards and consumer units across the SW19 postcode — Wimbledon, London. From £350. Part P compliant, Electrical Installation Certificate issued same day.
Consumer unit replacement in SW19
Fuse board upgrade specialists in SW19
Prestige Engineers provide fuse board upgrades and full consumer unit replacements throughout the SW19 postcode (Wimbledon) and all surrounding areas. Whether your insurer is requiring an upgrade, you need an EV charger, are adding solar panels, or your property has an old rewirable fuse board, our NICEIC registered electricians handle everything from initial assessment through to the Electrical Installation Certificate.
Properties across the SW19 area that were built or last rewired before 2000 are likely to have a fuse board that cannot provide the RCD protection required by current wiring regulations (BS 7671:2018). Old rewirable fuse boards have no earth leakage protection — a fault in any connected appliance can deliver a potentially fatal electric shock without tripping the supply. Modern dual RCD or RCBO consumer units detect leakage currents as small as 30mA and disconnect within 40 milliseconds.
EV charger installation is driving a significant number of fuse board upgrades across the SW19 postcode. A 7kW home EV charger draws approximately 32A — more than a cooker hob run continuously. We assess your incoming supply at your SW19 property, calculate total connected load, and size the new consumer unit to handle the EV charger circuit alongside all existing circuits, with room for future additions.
Solar panel installations in SW19 also require consumer unit modifications. The inverter needs a dedicated circuit with generation meter and export protection, and many older boards cannot accommodate this. We coordinate with solar installers and handle the DNO application paperwork as needed.
All consumer unit replacement work in the SW19 postcode is Part P notifiable under the Building Regulations. As an NICEIC approved contractor, we self-certify the installation and notify your local authority on your behalf — no separate building control application needed. The Electrical Installation Certificate we issue on the day is the proof your insurer, mortgage lender, and future conveyancer will require.
What we do
Fuse board upgrade services
Consumer unit replacement
Full swap of your old fuse board for a modern dual RCD or RCBO consumer unit — compliant with BS 7671:2018 and Part P of the Building Regulations.
RCD protection
Residual current devices protect against electric shock and fire. Modern boards provide split-load or full RCBO protection on every circuit.
MCB circuit breakers
Miniature circuit breakers replace old rewirable fuses — they trip instantly on overload and reset with a switch rather than requiring fuse wire replacement.
Surge protection device
SPD installation protects sensitive electronics (smart TVs, computers, appliances) from voltage spikes caused by lightning or grid switching.
EV charger preparation
Installing a home EV charger requires a dedicated circuit and often a board upgrade. We size the new consumer unit with capacity for your charger from day one.
New circuit addition
Adding an extension, outbuilding, garden office or kitchen rewire? We add dedicated circuits to the new board with correct protection for each load.
Transparent pricing
Fuse board upgrade cost
from £350
Standard consumer unit upgrade
- Like-for-like consumer unit replacement
- Dual RCD or full RCBO board
- Part P Building Regulations notification
- Electrical Installation Certificate same day
- Up to 10 circuits (typical 3-bed home)
from £600
Board upgrade with remedial wiring
- Consumer unit replacement included
- Remedial work on circuits failing inspection
- Additional circuits or sub-main upgrades
- Partial rewire where needed for compliance
- Suitable where EICR has revealed C2/C1 faults
Final price depends on number of circuits, access, and any remedial work identified during our initial assessment. We provide a fixed written quote before starting.
Ready to upgrade?
Book your fuse board upgrade in SW19
NICEIC registered. Part P compliant. Electrical Installation Certificate issued same day. Covering the full SW19 postcode.
Get a fixed quote180+ verified reviews
Trusted by London homeowners
60 reviews
Checkatrade.com
120 reviews
MyBuilder.com
Common questions
Fuse board upgrade SW19: frequently asked
How much does a fuse board upgrade cost in SW19?
A fuse board upgrade (consumer unit replacement) in the SW19 postcode (Wimbledon) from Prestige Engineers starts from £350 for a standard replacement. Properties requiring remedial wiring work alongside the board upgrade start from £600. We provide a fixed written quote before any work begins.
Do you upgrade fuse boards in the SW19 area?
Yes — we cover the SW19 (Wimbledon) postcode for all fuse board upgrades and consumer unit replacements. Our NICEIC registered electricians attend the SW19 area, complete the work in a single day, and issue the Electrical Installation Certificate before leaving.
Is fuse board replacement Part P notifiable in SW19?
Yes — consumer unit replacement is Part P notifiable throughout England, including the SW19 postcode. As an NICEIC approved contractor, we self-certify the work and notify your local authority on your behalf. No separate building control application is required.
Can you upgrade my fuse board for an EV charger in SW19?
Yes — EV charger installation is one of the most common reasons homeowners in the SW19 area upgrade their consumer unit. We assess your incoming supply capacity, size the new board to handle the EV charger load alongside existing circuits, and install the dedicated circuit as part of the same visit.